The essentials

A blood culture checks whether bacteria or fungi are growing in your blood, which is normally sterile. Blood goes into bottles that the lab watches for up to 5 days: most true infections show up within the first day, and "no growth at 5 days" is the usual normal result. One positive bottle is not always an infection: skin germs can contaminate the sample, so doctors check how many sets grew and which germ.

How do I read my blood culture report?

A blood culture report is built around "sets". One set is the blood from a single needle stick, shared between two bottles: one with air (aerobic) and one without (anaerobic). Doctors usually order two or more sets from different veins[2]. Below is a fictitious report for a 67-year-old woman with fever, chills and a urinary infection.

Fictitious example of a blood culture report (United States format)
TestResultReferenceFlag
SpecimenBlood, peripheral. Set 1: left arm. Set 2: right arm--
Culture, blood (set 1)Positive at 14 hours, aerobic and anaerobic bottlesNo growth at 5 daysA
Gram stain (positive bottle)Gram-negative rodsNo organisms seenA
Culture, blood (set 2)Positive at 16 hours, aerobic bottleNo growth at 5 daysA
Organism identificationEscherichia coli, both sets-A
SusceptibilityTo follow--
  1. Positive at 14 hours: the bottle's sensor detected growth after 14 hours. In one hospital study, the median "time to positivity" of true infections was about 16 hours[5].
  2. Gram stain: the lab looks at a drop from the positive bottle and phones the result, often within 20 to 30 minutes[8]. Our Gram stain guide explains words such as "gram-negative rods".
  3. Same germ in both sets: when separate draws grow the same organism, a true bloodstream infection becomes much more likely than contamination[6]. Here it fits a kidney infection that has reached the blood.
  4. Susceptibility: which antibiotics work against the germ[2].

Blood culture, white cell count and CRP on the same report? BloodSense explains your whole lab report in plain language, so you know which questions to bring.

Read my lab report

What is a blood culture used for?

A blood culture looks for living bacteria or fungi in the bloodstream. Germs in the blood are called bacteremia (bacteria) or fungemia (fungi)[1][4]. The test names the germ and shows which antibiotics will work, so treatment can be targeted[2].

Doctors order it when an infection may have spread to the blood, for example:

  • signs of sepsis: high fever, chills, fast breathing and heart rate, confusion or low blood pressure[1];
  • a serious infection that can seed the blood, such as pneumonia, meningitis, a kidney infection or bone infection;
  • fever after travel, as in typhoid fever, where the blood culture is the main test in the first week;
  • fever with an IV line or a weak immune system;
  • unexplained fever in young children[2].

The culture is often ordered with blood tests that show inflammation, such as CRP, procalcitonin and lactate. Only the culture names the germ.

What is a normal blood culture result, and how long does it take?

Blood is normally sterile, so the normal result is "no growth"[1]. There is no number to compare, but the wording changes as the days pass.

What the report usually shows over time, and the sources
WhenWhat you may seeSource
Day 1 to 2Preliminary "No growth at 24 hours" or "at 48 hours"; 85% of bacteremias in one study were positive within 24 hoursCohort study[5]
Minutes after a bottle turns positiveGram stain called to the care teamReview[8]
Hours laterName of the germ, by mass spectrometry or a rapid DNA panel (about 3.5 to 8 hours for PCR)Review[8]
About 3 to 4 days in totalFull result with antibiotic susceptibility, by conventional methodsReview[8]
Day 5 (sometimes 7)Final "No growth at 5 days": the usual normal resultReview[3]

If cultures stayed negative for 24 hours, the chance of a bacteremia appearing later was only 1.8% in that same study[5]. Your laboratory's own incubation time and wording apply.

What does a positive or negative blood culture mean?

Positive means something grew, not always an infection: the doctor weighs the germ, the number of positive sets and your symptoms[6].

When the culture is positive

  • Common A true infection: germs such as E. coli or Staphylococcus aureus (including MRSA), often from a urinary, lung, skin or abdominal source. S. aureus was found in the first set about 90% of the time[4].
  • Common Contamination: skin bacteria picked up during the draw, typically coagulase-negative staphylococci, Corynebacterium, Cutibacterium, Micrococcus or Bacillus, in only one of several sets[6]. Depending on the study, 20 to 56% of all positive blood cultures are contaminated[6].
  • Possible Yeasts, mostly in people in hospital or with a central line: see candidiasis.
  • Rare Slow-growing or hard-to-grow germs, which may need longer incubation or other tests[2].

When the culture is negative

  • Common No germs in the blood: the fever has another cause, such as a virus or a local infection[1].
  • Possible Antibiotics were started before the draw. In patients with sepsis, cultures found a germ in 50.6% of those not yet on antibiotics, but only 27.7% of those already treated[7].
  • Possible Too little blood or too few sets. One set detected 73% of bloodstream infections, two about 90%, three 98% and four more than 99%[4].
  • Rare A germ that does not grow in standard bottles, or a virus, which needs other tests[2].

What can affect a blood culture result?

No fasting is needed[1]. The quality of the draw matters most:

  • Drawn before the first antibiotic dose, when this does not delay urgent treatment[7].
  • Two or more sets, from separate sticks, ideally different veins[2][3].
  • Enough blood: adult bottles hold 8 to 10 mL each, about 20 to 30 mL per set, and are often under-filled[3].
  • Skin cleaned with an antiseptic such as chlorhexidine and left to dry[1][6].
  • Bottles sent quickly to the lab: storage and transport delays slow the result[8].

Waiting for a fever spike is not needed: drawing blood at the peak of a fever did not find more infections in a seven-hospital study[3]. Hospitals aim for contamination rates of 3% or less; 1% is achievable[6]. The draw itself is like any blood draw, with a small risk of bruising or feeling faint[1].

When to see a doctor

  • Emergency: call 911 for fever with confusion, fast breathing, cold or mottled skin, very low blood pressure or a stiff neck: these can be signs of sepsis or meningitis.
  • Within 24 to 48 hours if you were sent home and the hospital calls about a positive culture, or if your fever keeps rising.
  • At your next appointment to review the final result, the antibiotic chosen and whether repeat cultures are planned.

Questions to ask your doctor

  1. How many sets grew, and do you think this is a true infection or contamination?
  2. Where do you think the infection started, and will you repeat the cultures?
  3. Will my antibiotic change once the susceptibility results are back?

Frequently asked questions

Can a blood culture detect a virus?

No. Standard bottles grow bacteria and fungi; viruses need other tests, such as PCR[2].

Can you have bacteria in the blood without sepsis?

Yes. Bacteremia means germs in the blood; sepsis is the body's harmful reaction to an infection, with organ strain. A positive culture can come without sepsis, and sepsis can occur with negative cultures[1][7].

What is the difference between a CBC and a blood culture?

A complete blood count counts your own cells, such as white cells, within hours. A blood culture grows germs from the blood and takes days. A high white count suggests inflammation but cannot name a germ.

Why do they take blood from both arms?

Separate draws catch more infections and help tell a true infection, found in several sets, from a skin contaminant found in one[4][6].

References

  1. MedlinePlus. Blood culture. Medical Encyclopedia. US National Library of Medicine. medlineplus.gov (accessed November 21, 2026)
  2. Testing.com. Blood Culture. testing.com (accessed November 21, 2026)
  3. Lamy B, Dargère S, Arendrup MC, Parienti JJ, Tattevin P. How to optimize the use of blood cultures for the diagnosis of bloodstream infections? A state-of-the art. Front Microbiol. 2016;7:697. doi:10.3389/fmicb.2016.00697 (accessed November 21, 2026)
  4. Lee A, Mirrett S, Reller LB, Weinstein MP. Detection of bloodstream infections in adults: how many blood cultures are needed? J Clin Microbiol. 2007;45(11):3546-3548. doi:10.1128/JCM.01555-07 (accessed November 21, 2026)
  5. Lambregts MMC, Bernards AT, van der Beek MT, Visser LG, de Boer MG. Time to positivity of blood cultures supports early re-evaluation of empiric broad-spectrum antimicrobial therapy. PLoS One. 2019;14(1):e0208819. doi:10.1371/journal.pone.0208819 (accessed November 21, 2026)
  6. Doern GV, Carroll KC, Diekema DJ, et al. Practical guidance for clinical microbiology laboratories: a comprehensive update on the problem of blood culture contamination and a discussion of methods for addressing the problem. Clin Microbiol Rev. 2019;33(1):e00009-19. doi:10.1128/CMR.00009-19 (accessed November 21, 2026)
  7. Scheer CS, Fuchs C, Gründling M, et al. Impact of antibiotic administration on blood culture positivity at the beginning of sepsis: a prospective clinical cohort study. Clin Microbiol Infect. 2019;25(3):326-331. doi:10.1016/j.cmi.2018.05.016 (accessed November 21, 2026)
  8. Idelevich EA, Reischl U, Becker K. New microbiological techniques in the diagnosis of bloodstream infections. Dtsch Arztebl Int. 2018;115(49):822-832. doi:10.3238/arztebl.2018.0822 (accessed November 21, 2026)
  9. Miller JM, Binnicker MJ, Campbell S, et al. Guide to utilization of the microbiology laboratory for diagnosis of infectious diseases: 2024 update by the Infectious Diseases Society of America (IDSA) and the American Society for Microbiology (ASM). Clin Infect Dis. 2024. doi:10.1093/cid/ciae104 (accessed November 21, 2026)

This page gives general information about blood cultures. It does not replace the advice of the care team that knows your symptoms, your treatment and your full results.