The essentials

A Gram stain is a quick microscope test that sorts bacteria into two groups: gram-positive (purple) and gram-negative (pink or red), then describes their shape. It gives a first clue within hours, long before the culture names the exact germ. A "no organisms seen" result does not fully rule out infection, and white and skin cells on the report tell you how good the sample was.

How do I read my Gram stain report?

A Gram stain line usually reads like a short sentence: an amount, a color group, a shape and sometimes a grouping, for example "many gram-positive cocci in chains". The report also lists the cells seen alongside the bacteria[3]. Below is a fictitious sputum report for a 64-year-old man with fever and a productive cough.

Fictitious example of a sputum Gram stain report (United States format)
TestResultReferenceFlag
SpecimenSputum, expectorated--
Squamous epithelial cellsFewer than 10 /LPFFewer than 10 /LPF (acceptable sample)-
White blood cells (PMNs)More than 25 /LPFNone to fewA
OrganismsMany gram-positive cocci in pairs and short chainsNo predominant organismA
Other floraFew mixed oral floraMixed flora may be present-
CulturePending--
  1. Squamous epithelial cells: skin-type cells from the mouth. Few of them means the sample came from the lungs rather than saliva; studies call a sputum "good quality" with more than 25 white cells and fewer than 10 epithelial cells per low-power field (LPF)[6].
  2. White blood cells: pus cells, mostly neutrophils, show inflammation at the site; their presence also confirms an adequate sample[3].
  3. Organisms: "gram-positive" is the color group, "cocci" the round shape, "in pairs and short chains" the grouping. The amount is graded in words such as rare, few, moderate and many.
  4. Culture: the same sample is grown in the lab; it names the bacterium and tests antibiotics, usually after 1 to 2 days or longer[4].

Gram stain, culture and blood tests on the same report? BloodSense explains your whole lab report in plain language, so you know which questions to bring.

Read my lab report

What is a Gram stain used for?

The test is named after the Danish scientist Hans Christian Gram, who described it in 1884[3]. The lab spreads the sample on a glass slide, adds a purple dye, an iodine solution, a decolorizer and a red counterstain. Bacteria with a thick cell wall keep the purple dye; those with a thin wall rich in fats (lipids) lose it and take the pink color[2].

Doctors use it when they suspect a bacterial, or sometimes fungal, infection[1]. Common samples are:

Its value is speed. The color and shape often let a doctor choose a first antibiotic while the culture and susceptibility tests are still running[3]. For urine, the culture usually carries the weight: see our guide to urine culture results.

What is a normal Gram stain result?

There is no number to compare. "Normal" depends on where the sample came from, because some sites are sterile and others always carry bacteria[3].

What a reassuring Gram stain usually looks like, by sample, and the sources
SampleUsual finding without infectionSource
Spinal fluid, joint fluid, other sterile fluidsNo organisms seenPathology Tests Explained[3]
SputumMixed mouth flora, no single predominant organism; few epithelial cells shows a valid samplePathology Tests Explained[3], meta-analysis[6]
Vaginal swabMostly long gram-positive rods (lactobacilli): Nugent score 0 to 3CDC guidelines[5]
Urethral swab (men)Fewer than 2 white cells per oil immersion field, no intracellular diplococciCDC guidelines[5]

Your laboratory's own wording and thresholds apply. A stain is not done on every sample: for stool or throat swabs, harmful and harmless bacteria look the same under the microscope[3].

What do gram-positive and gram-negative results mean?

"Positive" and "negative" describe a color, not good or bad news, and not whether bacteria are present[2]. The table gives the usual first suspects.

Common Gram stain descriptions and what they often point to
DescriptionOften suggestsSource
Gram-positive cocci in clustersStaphylococci, including MRSAReview[9]
Gram-positive cocci in chainsStreptococci (such as strep throat germs) or enterococciReview[9]
Gram-negative rods (bacilli)E. coli, Klebsiella, PseudomonasCleveland Clinic[2]
Gram-negative diplococci inside white cellsNeisseria: gonorrhea, or meningococcus in spinal fluidCDC guidelines[5]
Yeasts or branching hyphaeA fungal infectionPathology Tests Explained[3]

When something is found

  • Common Many organisms of one type with many white cells at an infected site, such as a wound or the lungs. In a review of 20 studies of community-acquired pneumonia, the sputum stain correctly flagged pneumococcus in 59% of cases and gram-negative rods in 64%, and was rarely wrong when it did flag them (specificity 87 to 99%)[6].
  • Common Mixed flora with many epithelial cells: usually saliva or skin contamination rather than infection[3].
  • Possible Gram-negative intracellular diplococci in a man's urethral discharge. With symptoms, this is considered diagnostic of gonorrhea, with over 95% sensitivity and over 99% specificity[5]; see our page on STI testing.
  • Possible A vaginal Nugent score of 7 to 10, which means bacterial vaginosis; 4 to 6 is "intermediate"[5].
  • Rare Bacteria in spinal fluid: a sign of bacterial meningitis. The stain is positive in 60 to 80% of untreated cases and 40 to 60% after antibiotics[7].

When nothing is found

  • Common No infection, or too few bacteria: a smear needs roughly 1,000 bacteria to show them, so "no organisms seen" does not rule out infection[3].
  • Possible Antibiotics started before the sample, which lower the yield[7].
  • Possible A germ the stain cannot show: viruses, tuberculosis (it needs an acid-fast stain) and parasites need other tests[3][1].

In joint infection, doctors still start treatment when the stain is negative but suspicion is strong, and the stain guides the first antibiotic when it is positive[8].

What can affect a Gram stain result?

No fasting or special preparation is needed[1]. Check these points with your care team:

  • The sample was taken before antibiotics, when possible: prior treatment lowers the chance of seeing and growing the germ[7][6].
  • Sputum came from a deep cough, not saliva: good-quality samples are obtained in only 14 to 71% of patients, and a poor one may need repeating[6].
  • The sample was collected in a sterile container and sent to the lab[2].
  • Results are read with your symptoms: a stain is a preliminary result, and the culture or other tests confirm it[3].

In women and in men without symptoms, a Gram stain of the cervix, throat or rectum misses too many gonorrhea infections; a nucleic acid test (NAAT) is used instead[5].

When to see a doctor

  • Emergency: call 911 for fever with a stiff neck, confusion or a seizure, possible sepsis, or a sudden red, hot, painful joint you cannot move[8].
  • Within 24 to 48 hours if your report shows bacteria and you have not yet been contacted, if you have a discharge after a new sexual partner, or if a wound is spreading redness.
  • At your next appointment to review the final culture and susceptibility results, or a stain that showed only mixed flora.

Questions to ask your doctor

  1. Does this stain fit an infection, or could it be contamination of the sample?
  2. Was my first antibiotic chosen from the stain, and will it change once the culture is back?
  3. When will the culture and susceptibility results be ready?

Frequently asked questions

Does gram-negative mean I have no bacteria?

No. Gram-negative bacteria are present bacteria that stain pink. A result with no bacteria reads "no organisms seen"[2].

Are gram-negative infections more serious?

Not as a rule. Both groups include harmless and dangerous species; the site of infection, the exact germ and its resistance matter more. The color mainly helps choose a first antibiotic[8].

How long does a Gram stain take?

The stain itself is quick and reported promptly, often the same day[3]. The culture takes 1 to 2 days for most bacteria, sometimes 5 days or more[4].

Can a Gram stain detect a virus or COVID-19?

No. Viruses cannot be seen with a Gram stain; they need other tests, such as PCR[1][3].

References

  1. MedlinePlus. Gram Stain. Medical Tests. US National Library of Medicine. medlineplus.gov (accessed November 20, 2026)
  2. Cleveland Clinic. Gram Stain. Health Library: Diagnostics & Testing. my.clevelandclinic.org (accessed November 20, 2026)
  3. Australasian Association for Clinical Biochemistry and Laboratory Medicine. Gram stain. Pathology Tests Explained. pathologytestsexplained.org.au (accessed November 20, 2026)
  4. MedlinePlus. Bacteria Culture Test. Medical Tests. US National Library of Medicine. medlineplus.gov (accessed November 20, 2026)
  5. Workowski KA, Bachmann LH, Chan PA, et al. Sexually Transmitted Infections Treatment Guidelines, 2021. MMWR Recomm Rep. 2021;70(4):1-187. doi:10.15585/mmwr.rr7004a1 (accessed November 20, 2026)
  6. Del Rio-Pertuz G, Gutiérrez JF, Triana AJ, et al. Usefulness of sputum gram stain for etiologic diagnosis in community-acquired pneumonia: a systematic review and meta-analysis. BMC Infect Dis. 2019;19(1):403. doi:10.1186/s12879-019-4048-6 (accessed November 20, 2026)
  7. Seehusen DA, Reeves MM, Fomin DA. Cerebrospinal fluid analysis. Am Fam Physician. 2003;68(6):1103-1108. aafp.org (accessed November 20, 2026)
  8. Horowitz DL, Katzap E, Horowitz S, Barilla-LaBarca ML. Approach to septic arthritis. Am Fam Physician. 2011;84(6):653-660. aafp.org (accessed November 20, 2026)
  9. Aoki Y. Refinement of presumptive antimicrobial therapy based on initial microbiological information on positive blood culture [in Japanese, English abstract]. Rinsho Byori. 2010;58(5):498-507. PubMed 20560459 (accessed November 20, 2026)

This page gives general information about the Gram stain. It does not replace the advice of the care team that knows your symptoms, your sample and your full results.